AcuRev 1310
Change CT Direction from Meter Settings 1312
AcuRev 1310 – Changing the CT Direction from the Meter Settings This document provides users with a walkthrough on how to change the direction of the CT through the meters settings. This setting change is performed from the AcuRev 1310 series meter ...
Phase Angle Modbus Registers
Phase Angle Modbus Registers The following table lists the voltage and current phase angles for the AcuRev 1310 series. The phase angle registers can be used to help determine if there are any wiring errors. Address (H) Address (D) Parameter Data ...
AcuRev 1310 - How to use Wiring Check
Wiring Check The AcuRev 1312 meter supports a built-in wiring check function, this allows users to identify what the actual error is on the meter. This check uses the voltage and current phase angles to determine if there is a wiring issue. If the ...