Phase Angle Modbus Registers

Phase Angle Modbus Registers

Phase Angle Modbus Registers



The following table lists the voltage and current phase angles for the AcuRev 1310 series.  The phase angle registers can be used to help determine if there are any wiring errors.

Address (H)

Address (D)

Parameter

Data Type


203AH-203BH


8250-8251


Phase Angle of V1


Float


203CH-203DH


8252-8253


Phase Angle of V2 to V1


Float


203EH-203FH


8254-8255


Phase Angle of V3 to V1


Float


2040H-2041H


8256-8257


Phase Angle of I1 to V1


Float


2042H-2043H


8258-8259


Phase Angle of I2 to V1


Float


2044H-2045H


8260-8261


Phase Angle of I3 to V1


Float



 



    • Related Articles

    • AcuRev 1310 - How to use Wiring Check

      Wiring Check The AcuRev 1312 meter supports a built-in wiring check function, this allows users to identify what the actual error is on the meter. This check uses the voltage and current phase angles to determine if there is a wiring issue. If the ...

    • Acuvim II Installation Guide

      Acuvim II Installation Guide Overview We walk through the installation of the Acuvim II power and energy meter in a number of configurations. Voltage and Current Connection The Acuvim II can be installed using some of the common installation methods ...

    • Change CT Direction from Meter Settings 1312

      AcuRev 1310 – Changing the CT Direction from the Meter Settings This document provides users with a walkthrough on how to change the direction of the CT through the meters settings. This setting change is performed from the AcuRev 1310 series meter ...

    • AcuCT Flex CT Installation Guide

      AcuCT Flex Installation Guide Overview Detailing the installation of AcuCT Flex series of flexible current transformers in a number of configurations. ​Key Symbols AcuCT Flex Warnings Warning: Disconnect power supply before making electrical ...

    • Data Log Configuration using meters internal memory on Acuview

      AcuDC 240 - Data Log Configuration using meters internal memory on Acuview This document provides a procedure on how to configure the data log on the AcuDC 240 series meters as well as how to read the data from the data log once configured. You will ...